Product parameter 

Project	Car Wash Equipment Parameters	Remarks
Car Wash Speed	Continuous 80-second per vehicle	Variable Frequency Speed ​​Control
Car Wash Water Consumption	100-140 liters/vehicle	Average number of washes per vehicle
Car wash power consumption	0.68 kWh/vehicle	Average number of washes per vehicle
Maximum car wash height	2000mm	Unit: mm
Maximum car wash width	2200mm	Unit: mm
Maximum Wash Length	5500mm	Unit: mm
Total Installed Power	32KW	Total Electrical Power
Installed Voltage	380V/50Hz	Three-phase five-wire system / 16 square millimeter national standard wire
Equipment dimensions	Length 10.1m * Width 4m * Height 3.2m	Unit: Meters
Equipment installation dimensions	Length 26.1m * Width 4m * Height 3.2m	Unit: Meters
Brush configuration	Group brush x4 Instant brush x4 Top brush x1

Site map: 

Applicable Model

 

Application scenarios

Auto repair shop

Gas station

4S shop

iSensoric Intelligent Sensing System

Powered by the iSensoric intelligent sensing system, it accurately senses the vehicle's shape, automatically adjusts car wash parameters, and updates intelligent car wash data in real time to continuously improve cleanliness and achieve better vehicle washing and care results.

Parking Assist System

Variable frequency speed control wheel alignment and guidance drive, intelligent rear-end collision prevention: Hot-dip galvanized steel base with hardened and thickened steel, large ball bearings and a thickened transmission chain, strong tensile strength and crack resistance, sturdy and durable, capable of simultaneously driving three vehicles.

Principle: The entire steel plate simultaneously drives the safety guide structure. When the vehicle enters the correct position (left front tire in the center of the track), the equipment starts operating. The guide platform automatically corrects the vehicle's entry position, synchronously moving the left and right rear wheels to straighten the vehicle and prevent it from drifting during washing, resulting in side-mounted towing, or the wash brushes getting too close to the vehicle surface.

 

High-Pressure Water Pre-rinse System

High-Pressure Pre-rinse System: Before the actual car wash, the moving sprayers on the top and sides of the car wash equipment cover the entire car body surface. After soaking, most of the sand and dirt can be separated from the paint, avoiding the danger of sand and mud scratching the paint surface when applying car wash liquid.

Rain Shower System

After the high-pressure pre-rinse step, the entire vehicle is further sprayed with car wash foam liquid, resulting in a deep cleaning effect.

 

 

360-degree all-around cleaning system

Nano-foam cleaning brush for comprehensive cleaning, effectively removing oil stains and grime from hard-to-reach areas of the car body.

 

 

Coating System

Car Paint Surface Maintenance: After a full vehicle wash, spray the entire car with a water-based wax for comprehensive paint surface maintenance, then rinse the car body with clean water.

 

 

Intelligent Telescopic Wheel Brush System

Uses imported Japanese high-density bristles for close-fitting cleaning. The telescopic brush closely conforms to the wheel hub, combined with high-pressure water rinsing, effectively removing stubborn stains from the wheel hub.

 

 

Intelligent Controlled Drying System

The Q-type powerful, low-noise oscillating dryer, combined with a noise reduction system, features intelligent frequency conversion for nighttime operation, ensuring quiet drying without disturbing neighbors. The frequency conversion soft-start drying system saves 30% on energy while effectively protecting the motor and extending its lifespan.

 

 

Polishing and Water Removal System

The top two sides are finished with a final water removal process, replacing manual wiping to remove residual water stains from the car body, providing a new generation of polishing experience.

 

 

Car wash equipment liquid supply system

The system uses a digitally controlled metering pump system for liquid supply, featuring a low liquid level alarm function. The tunnel car wash machine uses 15ml of consumables per vehicle, with chemical refill intervals of 200-300 vehicles. (20L)

 

 

Car wash brush system

The principle of the current top brush is to control the horizontal brush by setting an analog value. When the horizontal brush pressure is greater than the set analog value, it will automatically control the rise to reduce the negative pressure to the rated value. When the horizontal brush pressure is less than the rated analog value, it will automatically and evenly drop. Therefore, by using analog control technology, the horizontal brush moves evenly and gently when it is contour brushing and will not press on or damage the car.

Car Washing Process

Multiple car wash speeds are available.