Product parameter
| Project | Car Wash Equipment Parameters | Remarks |
| Car Wash Speed | Continuous 80-second per vehicle | Variable Frequency Speed Control |
| Car Wash Water Consumption | 100-140 liters/vehicle | Average number of washes per vehicle |
| Car wash power consumption | 0.78 kWh/vehicle | Average number of washes per vehicle |
| Maximum car wash height | 2000mm | Unit: mm |
| Maximum car wash width | 2200mm | Unit: mm |
| Maximum Wash Length | 5500mm | Unit: mm |
| Total Installed Power | 35KW | Total Electrical Power |
| Installed Voltage | 380V/50Hz | Three-phase five-wire system / 16 square millimeter national standard wire |
| Equipment dimensions | Length 12.4m * Width 4m * Height 3.2m | Unit: Meters |
| Equipment installation dimensions | Length 28.4m * Width 4m * Height 3.2m | Unit: Meters |
| Brush configuration | Group Brush x4 Standing Brush x4 Rotating Brush x2 Top Brush x1 | |
Site map:
Applicable Model
Application scenarios
Auto repair shop |
Gas station |
4S shop |
iSensoric Intelligent Sensing System
Powered by the iSensoric intelligent sensing system, it accurately senses the vehicle's shape, automatically adjusts car wash parameters, and updates intelligent car wash data in real time to continuously improve cleanliness and achieve better vehicle washing and care results.
Parking Assist System
Variable frequency speed control wheel alignment and guidance drive, intelligent rear-end collision prevention: Hot-dip galvanized steel base with hardened and thickened steel, large ball bearings and a thickened transmission chain, strong tensile strength and crack resistance, sturdy and durable, capable of simultaneously driving three vehicles.
Principle: The entire steel plate simultaneously drives the safety guide structure. When the vehicle enters the correct position (left front tire in the center of the track), the equipment starts operating. The guide platform automatically corrects the vehicle's entry position, synchronously moving the left and right rear wheels to straighten the vehicle and prevent it from drifting during washing, resulting in side-mounted towing, or the wash brushes getting too close to the vehicle surface.
High-Pressure Water Pre-rinse System
High-Pressure Pre-rinse System: Before the actual car wash, the moving sprayers on the top and sides of the car wash equipment cover the entire car body surface. After soaking, most of the sand and dirt can be separated from the paint, avoiding the danger of sand and mud scratching the paint surface when applying car wash liquid.
Rain Shower System
After the high-pressure pre-rinse step, the entire vehicle is further sprayed with car wash foam liquid, resulting in a deep cleaning effect.
360-degree all-around cleaning system
Nano-foam cleaning brush for comprehensive cleaning, effectively removing oil stains and grime from hard-to-reach areas of the car body.
Coating System
Car Paint Surface Maintenance: After a full vehicle wash, spray the entire car with a water-based wax for comprehensive paint surface maintenance, then rinse the car body with clean water.
Intelligent Telescopic Wheel Brush System
Uses imported Japanese high-density bristles for close-fitting cleaning. The telescopic brush closely conforms to the wheel hub, combined with high-pressure water rinsing, effectively removing stubborn stains from the wheel hub.
Intelligent Controlled Drying System
The Q-type powerful, low-noise oscillating dryer, combined with a noise reduction system, features intelligent frequency conversion for nighttime operation, ensuring quiet drying without disturbing neighbors. The frequency conversion soft-start drying system saves 30% on energy while effectively protecting the motor and extending its lifespan.
Polishing and Water Removal System
The top two sides are finished with a final water removal process, replacing manual wiping to remove residual water stains from the car body, providing a new generation of polishing experience.
Car wash equipment liquid supply system
The system uses a digitally controlled metering pump system for liquid supply, featuring a low liquid level alarm function. The tunnel car wash machine uses 15ml of consumables per vehicle, with chemical refill intervals of 200-300 vehicles. (20L)
Car wash brush system
The principle of the current top brush is to control the horizontal brush by setting an analog value. When the horizontal brush pressure is greater than the set analog value, it will automatically control the rise to reduce the negative pressure to the rated value. When the horizontal brush pressure is less than the rated analog value, it will automatically and evenly drop. Therefore, by using analog control technology, the horizontal brush moves evenly and gently when it is contour brushing and will not press on or damage the car.
Car Washing Process
Multiple car wash speeds are available.
Keywords:Tunnel Car Washing Machine,Through Bus Wash Machine,Reciprocating Bus Wash Machine,Contactless car wash machine,Reciprocating Car Wash Machine,Through Bus Wash Machine
Contact
Tel:400-188-9597
Phone: 86-17816591688
Address: No. 1299‑3 Pengbei Avenue, Sanjia Sub‑district, Taizhou Bay New Area, Taizhou City, Zhejiang Province, P.R.China
Website: www.zjyjxcj.com
HUATAO GROUP
Leave Message
If you have any queries about us or our product(s), feel free to drop us a message.